The target scope with fast crosshair adjustment and zero stop
The double scale of the height adjustment tower allows you to read the set value. After firing the weapon, the crosshairs can be "zeroed". The zero adjustment ring is then turned as far as it will go. The values of the tower do not need to be monitored when resetting, it stops at the zero stop point when rewinding. Knowing the chosen shooting distance, different shooting distances can be set to the zero position with the help of the marking system. The side adjustment turret has two opposing scales. Thus, starting from zero, the crosshair can be pre-adjusted based on the wind direction, wind intensity, and the possible movement of the target.
From 25 m upwards, a razor-sharp image is guaranteed at all magnification settings, and with the option of parallax adjustment, marksmanship errors caused by oblique viewing can be corrected.
The nitrogen filling of the Nachtfalke 5-30x50 tactical riflescope ensures water resistance and protects against internal fogging. The scope's solid construction and use of materials (made of duralumin (70 percent), brass (20 percent) and steel (10 percent)) guarantee that the customer will receive a long-lasting device. The outer cover of the optics is more than 1 millimeter thick. The bullet resistance is 1000 G or 6500 joules. The target optics remain fully functional even at extreme temperatures (+80 degrees Celsius and at least -20 degrees Celsius).
The viewing distance is 89 mm, which means that it can be used safely even when using larger calibers. Only three-quarters of a turn is required to reach the full magnification range. Diopter adjustment (between -3 and +4) can be easily done on the rubberized, knurled end of the eyepiece.
The light point is so small that it disturbs the image as little as possible. Thanks to its fiber optic technology, the light point of the scope is not only darker, but also thinner. The illuminated point can be dimmed up to 100%, until it is no longer visible to the human eye. Below level 4, the light dot can only be seen with a night vision device.
If the light dot is turned off, the crosshair works without a light unit and there is no annoying free dot in the center of the crosshair . When the light spot is activated, there is no distracting light or even reflection inside the optics. As the lighting unit is manufactured by hand, the special needs of customers are prioritized.
Features:
- New CT (Clear Transmission) glass (clear transmission)
- Zero stop
- Double scaling
- excellent quality
- designed for prosecution with small turrets
- 1 pair of lens protective caps matching the optics
In the vertical position of the scope, the crosshair switches off automatically after a short time!
